Skip to main content

Nondestructive Testing (NDT):

Image
By
Nondestructive Testing (NDT) consists of a variety of non-invasive inspection techniques used to evaluate material properties, components, or entire process units. The techniques can also be utilized to detect, characterize, or measure the presence of damage mechanisms (e.g. corrosion or cracks). NDT is also commonly referred to as nondestructive examination (NDE), nondestructive evaluation (NDE), and nondestructive inspection (NDI). Many NDT techniques are capable of locating defects and determining the features of the defects such as size, shape, and orientation. The purpose of NDT is to inspect a component in a safe, reliable, and cost effective manner without causing damage to the equipment or shutting down plant operations. This is in contrast to destructive testing where the part being tested is damaged or destroyed during the inspection process.

NDT can be performed during or after manufacture, or even on equipment that is in service. In manufacturing, NDT inspections determine if parts are fit for a desired function. In other words, parts are inspected to ensure they will last a certain amount of time or cycles before failure. During operation, NDT inspections can be used to asses the current damage state of equipment, monitor damage mechanisms, and make informed decisions for remaining equipment life evaluations (e.g., RBI, FFS).

Overview of NDT Methods

NDT methods can generally be classified into two categories: conventional and advanced. Each method has its own characteristic advantages and limitations. More information on each test can be found in their respective Integripedia definitions.

Conventional NDT Techniques

Conventional methods are techniques that have matured over the course of decades and in this time, have become well-documented in codes, standards, and best practices. The setup and procedure of a conventional technique is typically simpler in comparison to advanced methods.
  • Acoustic Emission Testing (AET)
  • Infrared Testing (IR)
  • Leak Testing (LT)
  • Liquid Penetrant Testing (PT)
  • Electromagnetic Testing (ET)
  • Magnetic Particle Testing (MPT)
  • Radiographic Testing (RT)
  • Film Radiography (FR)
  • Ultrasonic Testing (UT)
  • Straight Beam
  • Vibration Analysis (VA)
  • Visual Inspection (VI)

Advanced NDT Techniques

Advanced methods tend to be less understood as they progress as emerging technologies, e.g. uncertain advantages or limitations, lack of technician qualification criteria, or little to no industry codification. Generally, the setup, procedure, and data interpretation of advanced methods is more complicated and can require specialized understanding and experience from a properly trained technician.
Furthermore, some methods can be further broken down into conventional and advanced techniques. Take two forms of ultrasonic testing for example, straight beam ultrasonic testing (UT) is a conventional technique used in simple applications whereas phased array ultrasonic testing (PAUT) is an advanced UT technique. As advanced techniques mature, new and more advanced versions of each emerge to start a new cycle of technical understanding and technician training.
  • Electromagnetic Testing (ET)
    • Alternating Current Field Measurement
    • Eddy Current Testing (ECT)
    • Magnetic Flux Leakage (MFL)
  • Laser Testing Methods (LM)
    • Holographic Testing
    • Laser Profilometry
    • Laser Shearography
  • Radiographic Testing (RT)
    • Computed Radiography (CR)
    • Computed Tomography (CT)
    • Digital Radiography (DR)
  • Ultrasonic Testing (UT)
    • Angle Beam
    • Automated Ultrasonic Backscatter Technique (AUBT)
    • Electromagnetic Acoustic Transducer (EMAT)
    • Immersion Testing
    • Internal Rotary Inspection System (IRIS)
    • Long Range Ultrasonic Testing (LRUT)
    • Phased Array Ultrasonic Testing (PAUT)
    • Time-of-Flight-Diffraction (TOFD)
Overall, NDT offers many advantages compared to destructive testing. The testing equipment is often portable and can be performed numerous times on a single component. The component itself can be thoroughly evaluated externally and internally for harmful flaws. The disadvantage is that the results are often qualitative and may be repeated and interpreted differently by various inspectors.

Industry Applications of NDT

NDT inspections are an integral part of the oil and gas and petrochemical industries, along with several other industries, including chemicals, aerospace, automotive, and defense. The overall goal of all these industries is to detect flaws in components to reduce failure and increase reliability.
In the petrochemical industry, NDT inspections are utilized throughout a facility’s lifecycle. This cradle-to-grave approach is an important element of asset integrity management. Furthermore, NDT inspections provide historical data about the facility’s process units and provide information on how often a component should be inspected, repaired, or replaced. Inspection intervals and tests may be changed depending on where the equipment is in its life-cycle (e.g. newly manufactured equipment vs. aging equipment). Performing multiple assessments throughout the equipment’s life-cycle may seem expensive. However, inspections conducted at specific intervals may end up saving an organization millions of dollars if testing reveals threats and equipment is repaired before shutting down the facility or experiencing a catastrophic failure.
The most common pieces of equipment that undergo inspection in the petrochemical industry are storage tanks, heat exchangers, pressure vessels, and piping systems. When planning an NDT inspection, there are four considerations one should account for:
  1. The type of damage mechanism to be inspected for
  2. The minimum detectable flaw size, shape, and orientation of the defect
  3. Where the defect is located (surface or internal)
  4. The sensitivities and limitations of the NDT method
With the above factors considered, operators can optimize facility production and increase personnel and environmental safety.

Codes and Standards Bodies

NDT is often prescribed by codes and standards for the fabrication of components, safety critical parts, and in-service equipment. Therefore, it is critical for all refinery, chemical plant, gas plant, and pipeline owners to have thorough understanding and experience in the interdisciplinary field of NDT. In addition to the factors listed above (Industry Application section) personnel should continuously develop knowledge about evolving technology and performing up-to-date procedures.
Specific codes, standards, specifications, regulations, and recommended practices may depend on the country and industry performing NDT. The following is a list of organizations (standards bodies) that develop and publish industrial codes, standards, and recommended practices for NDT methods relating to the oil and gas and chemical processing industries:
  • The American Society for Nondestructive Testing (ASNT)
  • ASTM International
  • American Society of Mechanical Engineers (ASME)
  • American Petroleum Institute (API)
  • American Welding Society (AWS)
  • National Board of Boiler and Pressure Vessel Inspectors (NBBI)
  • International Organization for Standardization (ISO)
  • European Committee for Standardization (CEN)
  • European Pressure Equipment Directive (PED)
A complete list of regulations created by the U.S. government may be found in the Code of Federal Regulations (CFR). Regulations critical to the petrochemical and chemical processing industries can be found under Title 10, Energy, and Title 49, Transportation.1

Training and Certification

Levels of Certification

Many NDT programs have three levels of qualification. A brief description of Level I, Level II, and Level III qualifications are outlined below and found in the ASNT Recommended Practice No. SNT-TC-1A document.2
Level I: At the end of a Level I certification program, individuals should be able to perform specific calibrations, specific NDT, and specific evaluations to determine if a component should be accepted or rejected for service.
Level II: Level II individuals should have the same abilities as Level I individuals and additionally, should be able to set-up, calibrate, perform, and evaluate NDT results with respect to applicable codes, standards, and specifications.
Level III: The highest qualified level of NDT personnel should have the same abilities as Level II individuals and additionally, be able to develop and qualify procedures, establish and approve techniques, interpret codes, standards, specifications and procedures, and assign particular NDT methods to use in specific applications.

Certification Requirements

Requirements are based on a combination of training, examination, and experience. Training is based on an accumulation of training course outlines from the NDT Body of Knowledge document. More detail on the ASNT NDT Body of Knowledge can be found in the ANSI/ASNT American National Standard CP-105. The purpose of the Body of Knowledge is to describe the knowledge and skills needed for different levels of certification. Several types of examinations are also necessary to meet minimum requirements and to recertify. Individuals may have to take a written exam, specific exam, or a practical exam depending on the certification desired. Experience in NDT or NDT-related fields as well as on-the-job training programs are also considered for certification.

Accredited Bodies for Training and Certification

American Petroleum Institute (API) — API offers numerous Individual Certification Programs (ICPs) specific to NDT personnel in the petroleum and petrochemical industries.
American Society for Nondestructive Testing (ASNT) — ASNT is a globally recognized organization that offers credentials for NDT personnel in a broad range of industries. Current certification programs include ASNT NDT Level II, ASNT NDT Level III, ASNT Central Certification Program (ACCP), and Industrial Radiography and Radiation Safety Personnel (IRRSP). 
British Institute of Non-Destructive Testing (BINDT) — BINDT is an accredited certification body and offers a Personnel Certification in Non-Destructive Testing (PCN).
International Standards Organization (ISO) — ISO 9712 (Non-destructive testing -- Qualification and certification of NDT personnel) is a published standard that details the requirements for qualification and certification of personnel that perform NDT.
Natural Resources Canada (NRCan) — NRCan manages the Non-Destructive Testing Certification Body (NDTCB) which offers a Canadian General Standards Board (CGSB) certification.
The Welding Institute (TWI) — TWI offers personnel credentials through their accredited CSWIP certification schemes.

Comments

Post a Comment

Popular posts from this blog

Team Work - Meaning and Tips for better Team Work

By
A single brain is not always capable of making key decisions on its own. To come up with an efficient solution, an individual requires the help and advice of others. A team is established when individuals get together on a common platform with the common goal of completing a task. To guarantee optimum compatibility, team members should ideally come from similar backgrounds and have a single aim. To provide their best, the team members must complement each other and function as a single unit in tight cooperation. "There is no I in Team Work," as the saying goes, and each member must put the needs of his team first. Personal interests must take a second seat. Any team's performance is directly proportionate to the relationship between its members and their combined efforts. What is the definition of teamwork? Teamwork is defined as the sum of each team member's efforts toward the fulfilment of the team's goal. In other words, any team's backbone is its ability t
Post a Comment
Read more

Scientists discover a new theory / The fundamental property of light – 150 years after Maxwell

By
Light plays a vital role in our everyday lives and technologies based on light are all around us. So we might expect that our understanding of light is pretty settled. But scientists have just uncovered a new fundamental property of light that gives new insight into the 150-year-old classical theory of electromagnetism and which could lead to applications manipulating light at the nanoscale. It is unusual for a pure-theory physics paper to make it into the journal Science. So when one does, it’s worth a closer look. In the new study, researchers bring together one of physics' most venerable set of equations – those of James Clerk’s Maxwell’s famous theory of light – with one of the hot topics in modern solid-state physics: the quantum spin Hall effect and topological insulators . To understand what the fuss is about, let’s first consider the behaviour of electrons in the quantum spin Hall effect. Electrons possess an intrinsic spin as if they were tiny spinning-tops,
Post a Comment
Read more

19 Types Of Content Writing Services For Your Business

By
  It’s hard to know which type of content writing service is the best for your business.  There are so many  different types of content writing services  out there that it’s easy to get confused. You end up wondering if you’re choosing the right one for you. In this post, we’ll get rid of this confusion, once and for all. I’m going to list out the different kinds of writing services you could use.  By the end of this article, you’ll know whether you need a copywriter, a content writer, or a social media marketer and how they can help you achieve your business goals. This post is also useful for writers who want to hone their writing skills in a specific area. Let’s dive in and learn what types of content writing services exist and when you should use them. (Bonus – if you want to  hire the top 1%  of writers, go to the bottom to learn how). Types of Content Writing Services As we go through the list of content writing services, you will find that many of them overlap. That’s perfectly
Post a Comment
Read more